Our Projects

Call Us: +91 984 7197 929

CASTOR VILLAS AT PALAKKAD

Castor Proposes developing Gated Community Vills in 4 Cent Land area and 900 Sq.ft and 1250 Sq.ft Build Up Area with 2 Bed Room, Hall, Kitchen, Siteout, Car parking,  Dinning Hall and with 3 Bed Room, Hall, Kitchen, Siteout, Car parking,  Dinning Hall respectively.

Amenities

  1. Gated Community with Main Entrance Gate
  2. Security Provisioning
  3. Paved Drive way with Street Lighting
  4. Drainage System
  5. Well Water and Municipal Water Facility
  6. EB Connection
  7. Compound Wall


specifications:


CIVIL WORK


EARTH WORK EXCAVATION:

  1. Foundation Trenches, for all clauses of soil including cutting, Shoring, Strutting, dewatering etc.
  2. For column Foundation : 120 x 120 x 120 cm in Size
  3. Rubble Foundation : 60 x 60 x 60 cm in Size

PCC BELOW COLUMN FOUNDATION:

  1. Plain Cement Concrete 1:4:8 using 20MM downgraded aggregates as per Standard Architectural Specification.





RCC COLUMN FOOTING
:

  1. Reinforced Cement Concrete 1:2:4 using 20MM as per Standard Architectural Specification.

RR FOUNDATION WORK:

  1. 60cm x 60cm fitting and packing of Rubble with available soil.

RR BASEMENT:

  1. 45cm x 45cm fitting and packing of Rubble in cement mortar 1:6 as per Standard Architectural Specification

RCC BELT:

  1. Reinforced Cement Concrete in 1:2:4 as per Architectural Drawings, Size shall be 45 x 10 as per Standard Architectural Specification.

FILLING IN BASEMENT:

    • Filling in basement shall be done with available Red Earth or Slurry Dust.

LATERATE (CHENKALLU) WORK:

Good Quality Laterate Masonry in 20cm thick; Cement Mortar in 1:6 Client may opt for Good Quality Semi Wire-Cut Brick instead of Laterate; @Rs.75/- Extra/ Sft

PARAPET WORK:

  1. Single Brick Work shall be used for the Parapet Work.

PCC BELOW FLOORING:

  1. Plain Cement Concrete 1:4:8 as per Standard Architectural Specification.

RCC WORKS:

  1. RCC Columns, Beams, Slabs, Sun Shades, Stairs and Lintel; shall be Build using 20mm Downgraded aggregates in M20 Mix as per Standard Architectural Specification.

REINFORCED STEEL:

  1. Fixing Steel Reinforcement (High Yield Strength Deformed Bars Conforming to Fe 500) for R.C.C in all items, Work including transporting, recoiling, cutting, straightening, bending and placing in position at all levels & binding with approved gauge binding wire.

CEMENT:

  1. 43 Graded Ordinary Portland cement or Portland Pozzolana Cement of Dalmia, Chettinadu,Ramco, Malabar or Equivalent shall be used for all the works.

SAND:

    • Good Quality Crushed M-Sand (POABS) shall be used for all RCC and Super Structural Works, Good Quality River Sand or Crushed M-Sand which is specially graded for the plastering purpose shall be used for all plastering works as per the availability in the open Market.

      JOINERY WORK:

      1. Good Quality Imported Good Quality Imported Hard Wood shall be used for all the windows and Door Frames in size of 10cm X 6.5 cm. For All Paneled and Glazed Shutters Good Quality Imported Hard Wood shall be used.

      PLASTERING WORK:

      1. Outside Plastering Work shall be in Cement Mortar 1:5, 12 to 15 MM Thick. Inside Plastering Work shall be in Cement Mortar 1:6, 9 to 12 MM Thick and Ceiling shall be in 1:3 Cement Mortar, below 10MM Thick.

      HANDRAILS:

      1. Stainless Steel Handrails shall be used in Staircase Areas and upper living Cut-Off Areas.

      ROOFING TILES:

      1. Good Quality Terra Cotta Roofing tiles shall be used. (Priced at Maximum Rate of Rs.30/- per Sq.Ft)

      ELECTRICAL WORKS:

      1. Cables: Finolex, V.Guard or Equivalent Switches & Sockets: Modular Switches & Sockets from Hawells or Equivalent Final Fittings such as Fancy Lightings & Ceiling Fans should be provided by the Client at Site. Modular Switches & Sockets shall be provided in all applicable areas as per standard Requirements and any surplus requirements of Switches & Sockets shall be charged Additional.
      2. Any Additional A/c Points or Additional Geyser Points shall be charged as Extra,
      3. Electrical Provisioning and Cabling for Closed Circuit Cameras (CC CAMS) or Sensors shall also be charged as Extra

        PLUMBING AND SANITARY WORK:

        1. Complete Plumbing and Sanitary Works shall be executed by the Contractor; Using the below mentioned Brands
          • PVC Pipes : Thomson or Equivalent
          • CP Fittings : Zoloto Zew or Equivalent
          • Wall Mixer - Max.Rate: Rs.2000/-
          • Long Body Taps - Max.Rate: Rs.550/-
          • Health Faucets - Max.Rate: Rs.500/-
          • Angle Valves - Max.Rate: Rs.350/-
          • Shower Set - Max.Rate: Rs.500/-
          • Pillar Taps Bathrooms - Max.Rate: Rs.500/-
          • Pillar Tap for Hall - Max.Rate: Rs.1000/-
          • Sink Taps - Max.Rate: Rs.1000/-
          • Sanitary : Single Unit Imported Closet (Priced at Maximum Rate of Rs.9000/- per
          • Piece) and Half Pedestal Wash Basin from Cera or Equivalent.
          • Water Tank : Aqua-Tech, Sintex or Equivalent Quality of 1000 Liter Capacity
          • Kitchen Sink : 24 x 18 Sink for Kitchen and 18 x 16 Sink for Work Area (Brand: Diamond)

        CEMENT ORNAMENTAL DESIGN WORKS ON ELEVATION:

        • As per Elevation; all the cement ornamental works shall be accomplished.

        FLOORING TILES:

        • Hi Gloss Nano Technology 60cm x 60cm Vitrified Tiles shall be used for all Carpet Areas; Except Bathrooms. (Choice of Colour &Pattern as per the Client; Priced at Maximum Rate of Rs.50/- per Sft)

        KITCHEN DA DOING WALL TILES:
        Good Quality Glazed Tiles Shall be used for all Da Doing Works in the Kitchen Area (Size:45 x 30 Cms) (Choice of Colour &Pattern as per the Client; Priced at Maximum Rate of Rs.60/- per Sq.Ft

        KITCHEN TOP:

        • Good Quality Granite Slabs Shall be used for the Kitchen Top. (Priced at Max.Rate of Rs.200/- per Sft)

        BATHROOM FLOORING TILES:

        • Good Quality Anti-Skid Tiles shall be used for all Bathrooms. Size: 30 x 30 Cms. (Choice of Colour & Pattern as per the Client; Priced at Maximum Rate of Rs.45/- per Sq.Ft)

        BATHROOM WALL TILES:

        • Good Quality Bathroom Wall Tiles (Size: 45 x 30 Cms) of High lighter Model shall be Used (Choice of Colour &Pattern as per the Client; Priced at Maximum Rate of Rs.50/- per Sq.Ft)

        BATHROOM DOORS:

        • All Bathroom Doors Shall be Made with Good Quality PVC Doors from Sintex or Equivalent.

        PUTTY WORKS:

        1. Putty works shall be done in all the interiors area except in Kitchen & Work Areas. If required by the Client; we will also provide the Putty works in the Kitchen Area at no Extra Cost. Putty works shall also be done on the Exterior Elevation Areas. (Brand: Asian, Birla or JK Wall Putty)

        PAINTING WORK:

        1. Single Coat White Cement Washing shall be used all over the Plastered Area, Two Coats of Acrylic
        2. Emulsion shall be used all over the white washing Area including one coat of Cement Primer. Asian’s Apex Brand shall be used for all external Walls and Asian’s Regular emulsion shall be used for all internal Walls.

        FRONT DOOR – BED ROOM DOORS – KITCHEN DOORS:

        • Front Door, Bed Room Doors and Kitchen doors shall be made with Standard Size of Good Quality Imported Hard Wood. For Kitchen Door we provide Decorative Glass Doors (Half Wood with Half Hitched Decorative Glass)

        WOODEN POLISH:

        • All Wooden Surfaces shall be polished with Good Quality sealer, Wood Stainer and over coat shall be cleared with Melamine.

        WOODEN FITIINGS:

        1. All Wooden Fittings like Hinges, Tower Bolts and Mortise Lock shall be provided from Branded Companies having Stainless Matt Finish. Whereas the Front Door Fittings shall be of Brass. (Max.Rate for Front Door Lock: Rs.2000/- and All other Door Locks: Rs.750/-)

        GRILL WORK:

        • In Work Areas Safety Grills shall be provided using MS-Rods.

        SMOKELESS OVEN:

        • Standard size of Smokeless Oven shall be mounted in Fire Kitchen

        ANTI-TERMITE TREATMENT:

        • Against attack by subterranean termites; Chemical Treatment shall be implemented by experts having special know-how to ensure uniform distribution and proper penetration.

        SEPTIC TANK & WATER DRAINAGE SOCK PITS:

        • Septic Tank & Water Drainage Sock Pits shall be provided as per the standard Size & Capacity

         

        LUXURY VILLAS

        Castor offers the sophistication luxurious villa living and welcome you the exclusivity of lifestyle reminiscent of life in developing premium gated community villas in size ranging from 1800 sq.ft to 2700 sq.ft. at Plakkad designed by our architecture team. The spacious villas at Castor is a classic example of how green feature and contemporary planning comes together harmoniously. The design feature of the eco-sensitive luxury development embraces Indian heritage and contemporary style in a unique manner.  We developed different type villas at different plot size.

        FEATURES:

          • Open terrace for each villa
          • Expansive living spaces build up area ranging from 1800 sq.ft for 2700  sq.ft.
          • Creative design and architecture from leading architecture
          • Round of Clock dedicated Security Services
          • Professionally maintenance of property and villa by Castor